Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® Care ML94 - PA12 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® Care ML94:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Medium viscosity, heat stabilized Polyamide 12 for medical application

VESTAMID® Care ML94 is resistant to body fluids and toxicologically safe.
 

Typical application areas for filled VESTAMID Care ML grades include  catheters, housing parts, monitoring and imaging devices and durable medical equipment.

Advantages at a glance

- High impact resistance

- Easy processability & colorability

- Low sliding friction

- High toughness

- High abrasion resistance

- Density 1.0 g/cc

- High dimensional stability

- High chemical resistance

- Gamma and EtO sterilizable


Biocompatibility of VESTAMID® Care ML
VESTAMID® Care ML grades were tested on biocompatibility for applications within the body of up to 30 days contact time and comply with USP <88> class VI and ISO 10993 standards.

Biocompatibility tests for VESTAMID® Care:
Standard Description
ASTM F756-08 Hemocompatibility
ISO 10993-5 Cytotoxicity
ISO 10993-10 Sensitization: Maximization test according to Magnusson and Kligman
ISO 10993-10 Irritation: Intracutaneous Reactivity
ISO 10993-11 Acute Systemic Toxicity
USP Class VI Acute Systemic Toxicity Intracutaneous Reactivity Muscle Implantation
Processing of VESTAMID® Care
For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”.   


FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.EVONIK.COM/MEDICAL-TECHNOLOGY
Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 110 / * cm³/10min ISO 1133
온도 275 / * °C -
하중 5 / * kg -
성형 수축률, 평행 0.8 / * % ISO 294-4, 2577
성형 수축률, 수직 1.1 / * % ISO 294-4, 2577
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 1440 / 1050 MPa ISO 527
항복강도 45 / 40 MPa ISO 527
항복변형률 5 / 15 % ISO 527
파단시 평균신율 >50 / >50 % ISO 527
챠피 충격 강도 , +23°C N / N kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C N / N kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 5 / 6 kJ/m² ISO 179/1eA
Type of failure C / C - -
챠피 노치드 충격 강도, -30°C 6 / 4 kJ/m² ISO 179/1eA
Type of failure C / C - -
쇼어 D 경도 75 / * - ISO 7619-1
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 178 / * °C ISO 11357-1/-3
유리 전이 온도, 10 °C/min 45 / * °C ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa 50 / * °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 120 / * °C ISO 75-1/-2
비카트 연화 온도, B 140 / * °C ISO 306
선형 열팽창 계수, 평행 150 / * E-6/K ISO 11359-1/-2
선형 열팽창 계수, 수직 150 / * E-6/K ISO 11359-1/-2
1.5mm 평균두께에서의 난연성 HB / * class IEC 60695-11-10
테스트 두께 1.6 / * mm -
전기적 특성건조/응축단위시험규격
ISO 데이터
상대 유전율, 100Hz 3.8 / - - IEC 62631-2-1
상대 유전뮬, 1MHz 3 / - - IEC 62631-2-1
소산 인자, 100Hz 510 / - E-4 IEC 62631-2-1
소산 인자, 1MHz 270 / - E-4 IEC 62631-2-1
부피 저항 >1E13 / 2.5E12 Ohm*m IEC 62631-3-1
CTI 600 / - - IEC 60112
기타 특성건조/응축단위시험규격
물에서의 흡수성 1.5 / * % ISO 62와 유사
조건에서의 흡습성 0.8 / * % ISO 62와 유사
밀도 1010 / - kg/m³ ISO 1183
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이)
특별 특성
고충격 또는 고충격 보강, 열안정성, 멸균, 에틸렌 산화물 멸균(EtO), Gamma irradiation sterilization
특성
Tribologic Grade
내화학성에
General Chemical Resistance
Certifications
Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI Approved
응용
의료
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.