Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® L1930 BK 9.7506 - PA12-GD30 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® L1930 BK 9.7506:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Glass fiber-reinforced, heat- stabilized polyamide 12 compound

VESTAMID® L1930 BK 9.7506 is a heat stabilized, with 30% milled glass fiber-reinforced PA 12 compound suitable for injection molding.

Due to the reinforcement moldings from this compound exhibit a high strength and rigidity. Because PA 12 absorbs only little water, the parts have a good dimensional stability and almost unaffected mechanical properties at changing ambient humidity.

Due to the reinforcement the shrinking of moldings is decreased compared with unreinforced compounds. Using specialty short glass fibers for the reinforcement of VESTAMID® L1930 BK 9.7506 the difference between longitudinal and transverse shrinkage relating to the flow direction of the melt is significantly lower than with common glass fiber-reinforced products. Therefore especially low-warpage precision parts can be molded.
  
As a semi-crystalline material VESTAMID® L1930 BK 9.7506 feature an outstanding chemical resistance, e.g., against fuels, oils and fats.

VESTAMID® L1930 BK 9.7506 is supplied as cylindrical granules, ready for processing, in moisture-proof bags.
 
Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 
 
FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM
Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 27 / * cm³/10min ISO 1133
온도 220 / * °C -
하중 10 / * kg -
성형 수축률, 평행 0.5 / * % ISO 294-4, 2577
성형 수축률, 수직 0.5 / * % ISO 294-4, 2577
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 3800 / - MPa ISO 527
항복강도 64 / - MPa ISO 527
항복변형률 4 / - % ISO 527
파단시 평균신율 12 / - % ISO 527
챠피 충격 강도 , +23°C 80 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
챠피 충격 강도, -30°C 65 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
챠피 노치드 충격 강도, +23°C 7 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
챠피 노치드 충격 강도, -30°C 6 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 178 / * °C ISO 11357-1/-3
유리 전이 온도, 10 °C/min 39 / * °C ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa 130 / * °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 170 / * °C ISO 75-1/-2
비카트 연화 온도, B 170 / * °C ISO 306
전기적 특성건조/응축단위시험규격
ISO 데이터
부피 저항 1E13 / - Ohm*m IEC 62631-3-1
기타 특성건조/응축단위시험규격
물에서의 흡수성 1.1 / * % ISO 62와 유사
조건에서의 흡습성 0.5 / * % ISO 62와 유사
밀도 1240 / - kg/m³ ISO 1183
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이), 검정
특별 특성
열안정성
특성
Low Warpage
내화학성에
General Chemical Resistance, Grease Resistance, Oil Resistance
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.