Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® LX9117 BK - PA12-(GF+CD) - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® LX9117 BK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Electrically polyamide 12 compound for quick connectors

VESTAMID® LX9117 BK is a glass-fiber-reinforced, electrically conductive PA12 molding compound that was developed in particular for the injection molding of connecting elements for fuel line systems (such as quick connectors).
 
The electrical conductivity of VESTAMID® LX9117 BK changes only slightly on contact with fuels, even if they contain alcohol. This is of great importance for use in fuel-conducting systems.
 
The material also has the advantageous properties characteristic of polyamide 12. The low water absorption leads to good dimensional stability of components in changing ambient humidity, and the other properties also remain virtually unchanged.
 
VESTAMID® LX9117 BK is supplied as cylindrical granules, ready for processing, in moisture-proof bags.

Our technical experts would appreciate to give you support regarding the special requirements for the processing of VESTAMID® LX9117 BK.
 
Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.
 
The results shown have been generated from a low number of production lots. Therefore, they are preliminary and not yet the result of a statistical evaluation. Therefore they must not be used to establish specifications.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM
Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
성형 수축률, 평행 0.3 / * % ISO 294-4, 2577
성형 수축률, 수직 0.8 / * % ISO 294-4, 2577
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 7930 / - MPa ISO 527
항복강도 127 / - MPa ISO 527
항복변형률 4 / - % ISO 527
파단시 평균신율 4 / - % ISO 527
챠피 충격 강도 , +23°C 70 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
챠피 충격 강도, -30°C 50 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
챠피 노치드 충격 강도, +23°C 10 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
챠피 노치드 충격 강도, -30°C 9 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 177 / * °C ISO 11357-1/-3
유리 전이 온도, 10 °C/min 40 / * °C ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa 169 / * °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 179 / * °C ISO 75-1/-2
비카트 연화 온도, B 173 / * °C ISO 306
기타 특성건조/응축단위시험규격
물에서의 흡수성 1.1 / * % ISO 62와 유사
조건에서의 흡습성 0.6 / * % ISO 62와 유사
밀도 1330 / - kg/m³ ISO 1183
특징
생산 공정
사출 성형, 주조
인도 유형
펠렛 (입자,알갱이), 검정
부가물
이형제
특별 특성
증가된 전기전도성, 가시광선 안정성, U.V. 안정성 또는 기후 안정성, 열안정성
응용
전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.