Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTODUR® X7396 - PBT - Evonik Operations GmbH

Material Data Center offers the following functions for VESTODUR® X7396:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestodur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - 도표
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Low-shrinkage, polymer-modified polybutylene terephthalate compound

VESTODUR® X7396 is an unreinforced, heat-stabilized and polymer-modified poly­butylene terephthalate (PBT) compound with low shrinkage for extrusion.

 

The compound is especially suitable for the manufacture of stiff, small-diameter tubing, e.g. loose buffering for fiber optics. 

 

Compared with standard PBT compounds VESTODUR® X7396 has a higher hardness. This permits cable jacketing as a protective cover against rodent attacks.

 

VESTODUR® X7396 is supplied as cylindrical pellets in polyethylene packaging.

 

In the brochure "Engineering thermoplastics for high performance secondary fiber optic jacketing" instructions are given on the extrusion of loose or tight buffering for fiber optics. 

 

For information please follow the general recommendations in our flyer "VESTODUR® Polybutylene terephthalate - Compounds".

 

Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at tempIeratures not exceeding 30°C.

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTODUR.COM

Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 43 cm³/10min ISO 1133
온도 250 °C -
하중 10 kg -
성형 수축률, 평행 1.3 % ISO 294-4, 2577
성형 수축률, 수직 1.3 % ISO 294-4, 2577
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2600 MPa ISO 527
항복강도 65 MPa ISO 527
항복변형률 4 % ISO 527
파단시 평균신율 >50 % ISO 527
챠피 충격 강도 , +23°C N kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C 220 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 5.5 kJ/m² ISO 179/1eA
Type of failure C - -
챠피 노치드 충격 강도, -30°C 4.5 kJ/m² ISO 179/1eA
Type of failure C - -
열적 특성값단위시험규격
ISO 데이터
녹는점, 10°C/min 220 °C ISO 11357-1/-3
유리 전이 온도, 10 °C/min 56 °C ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa 65 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 85 °C ISO 75-1/-2
비카트 연화 온도, B 115 °C ISO 306
1.5mm 평균두께에서의 난연성 HB class IEC 60695-11-10
테스트 두께 1.6 mm -
두께 H인 제품의 난연성 HB class IEC 60695-11-10
테스트 두께 0.8 mm -
기타 특성값단위시험규격
물에서의 흡수성 0.48 % ISO 62와 유사
조건에서의 흡습성 0.35 % ISO 62와 유사
밀도 1250 kg/m³ ISO 1183
도표
비용적-온도(pvT) , VESTODUR® X7396, PBT, Evonik
특징
생산 공정
필름 압출, Pipe/Tube Extrusion, 기타 압출
인도 유형
펠렛 (입자,알갱이)
특별 특성
U.V. 안정성 또는 기후 안정성, 열안정성
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.