Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTORAN® X7342 - PPE-GF20 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTORAN® X7342:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestoran datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Modified polyphenylene ether (PPE), high heat resistant, 20 % glass fiber-reinforced

VESTORAN® X7342 is the registered trademark of the Evonik Degussa GmbH for molding compounds containing poly-2,6-dimethyl-1,4-phenylene ether as polymeric constituent (poly-phenylene ether, PPE, also referred to as PPO).

As a material of amorphous structure, VESTORAN® X7342 shows very small mold shrinkage. Therefore molded parts have a very low tendency to warp.

Moldings of VESTORAN® X7342 are dimen­sionally stable and hydrolysis resistant even in hot water, but are more sensitive to organic solvents than semi-crystalline plastics. VESTORAN® X7342 is resistant to aqueous alkalines and acides, certain alcohols, and glycol solutions.

Due to the glass fiber-reinforcement the compound combines outstanding heat deflection temperature under load with high strength and rigidity. The even smaller shrinkage compared to non-reinforced VESTORAN® depends on the orientation of the glass fibers in the molded part.
 
VESTORAN® X7342 is supplied as cylindrical granules in polyethylene packaging.
 
Processing advice is given in a separate product information.

Pigmentation may affect values.

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 40 cm³/10min ISO 1133
온도 300 °C -
하중 21.6 kg -
성형 수축률, 평행 0.2 % ISO 294-4, 2577
성형 수축률, 수직 0.4 % ISO 294-4, 2577
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 6100 MPa ISO 527
파단시 강도 108 MPa ISO 527
파단시 신율 3.5 % ISO 527
챠피 충격 강도 , +23°C 49 kJ/m² ISO 179/1eU
Type of failure C - -
챠피 노치드 충격 강도, +23°C 13 kJ/m² ISO 179/1eA
Type of failure C - -
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 165 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 170 °C ISO 75-1/-2
비카트 연화 온도, B 170 °C ISO 306
선형 열팽창 계수, 평행 40 E-6/K ISO 11359-1/-2
선형 열팽창 계수, 수직 30 E-6/K ISO 11359-1/-2
1.5mm 평균두께에서의 난연성 HB class IEC 60695-11-10
테스트 두께 1.6 mm -
두께 H인 제품의 난연성 HB class IEC 60695-11-10
테스트 두께 0.8 mm -
Yellow Card 유효한 예 - -
전기적 특성값단위시험규격
ISO 데이터
상대 유전율, 100Hz 3 - IEC 62631-2-1
상대 유전뮬, 1MHz 3.5 - IEC 62631-2-1
소산 인자, 100Hz 80 E-4 IEC 62631-2-1
소산 인자, 1MHz 10 E-4 IEC 62631-2-1
부피 저항 1E11 Ohm*m IEC 62631-3-1
CTI 175 - IEC 60112
기타 특성값단위시험규격
밀도 1190 kg/m³ ISO 1183
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이)
특별 특성
열안정성
특성
Amorphous, Low Warpage
내화학성에
Acid Resistance, Alkali Resistance, Hydrolytically Stable
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
화학적 매체에 대한 저항력
산
에서의 아세트산 (질량 5%) (23°C)
23 °C에서의 시트르산 용액 (질량 10%) (23°C)
에서의 염산 (질량 36%) (23°C)
23 °C에서의 질산 (질량 40%) (23°C)
에서의 황산 (질량 5%) (23°C)
염기
에서의 수산화나트륨 용액 (질량 35%) (23°C)
에서의 수산화나트륨 용액 (질량 1%) (23°C)
에서의 수산화암모늄 용액 (질량 10%) (23°C)
알코올
23 °C에서의 이소프로필 알코올 (23°C)
23 °C에서의 메탄올 (23°C)
23 °C에서의 에탄올 (23°C)
탄화수소
에서의 톨루엔 (23°C)
케톤
에서의 아세톤 (23°C)
광유
에서의 SAE 10W40 멀티그레이드 모터 오일 (130°C)
에서의 SAE 80/90 하이포이드 기어 오일 (130°C)
모터유, OS206 304 참조 엔진오일, ISP (135°C)
자동 하이포이드기어오일 셸 도낙스 TX (135°C)
유압유 펜토신 CHF 202 (125°C)
염액
에서의 염화나트륨 용액 (질량 10%) (23°C)
에서의 차아염소산나트륨 용액 (질량 10%) (23°C)
에서의 탄산나트륨 용액 (질량 20%) (23°C)
에서의 탄산나트륨 용액 (질량 2%) (23°C)
기타
에서의 DOT No. 4 브레이크 오일 (130°C)
미국교통국 4번 브레이크유 (120°C)
에서의 물 (23°C)
에서의 탈이온수 (90°C)
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.