Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTOSINT® 1184 white - PA12 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTOSINT® 1184 white:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vestosint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
VESTOSINT 1184 white is a polyamide (nylon) 12 fine powder specially developed for  mini coating of small metal parts, e.g. for corsetry.
기계적 특성값단위시험규격
ISO 데이터
쇼어 D 경도 75 - ISO 7619-1
Ball indentation hardness 101 MPa ISO 2039-1
열적 특성값단위시험규격
ISO 데이터
녹는점, 10°C/min 176 °C ISO 11357-1/-3
선형 열팽창 계수, 평행 104 E-6/K ISO 11359-1/-2
기타 특성값단위시험규격
조건에서의 흡습성 0.5 % ISO 62와 유사
밀도 1060 kg/m³ ISO 1183
Bulk density 400 kg/m³ -
특징
생산 공정
코팅
인도 유형
가루, 화이트
Certifications
Food contact
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.