Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Visico™ FR4450/LE4439 - PE - Borealis A/S

Material Data Center offers the following functions for Visico™ FR4450/LE4439:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Visico datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
용융 흐름성, MFI 0.7 g/10min ASTM D 1238
온도 190 °C -
하중 2.16 kg -
기계적 특성값단위시험규격
ASTM 데이터
인장 강도 15 MPa ASTM D 412
파단시 신율 300 % ASTM D 412
열적 특성값단위시험규격
ASTM 데이터
산소지수 32 % ASTM D 2863
전기적 특성값단위시험규격
ASTM 데이터
전기 압력, 단기간의 22 kV/mm ASTM D 149
기타 특성값단위시험규격
밀도 1100 kg/m³ ASTM D 792
Processing Recommendation Extrusion값단위시험규격
Type of extrusion wire/cable - -
Pre-drying - Temperature 100 °C -
Zone 1 130 °C -
Zone 2 140 °C -
Zone 3 150 °C -
Zone 4 160 °C -
Zone 5 170 °C -
특징
생산 공정
Wire/Cable Extrusion
인도 유형
자연 색상
특별 특성
난연성, Halogen-free
특성
Blending Resin, Crosslinkable, Thermal Stability
내화학성에
Oxidation Resistance
응용
전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.