Any use of this information falls under the rules of our
disclaimer.
Processing/Physical Characteristics | 값 | 단위 | 시험규격 |
ASTM 데이터 |
용융 흐름성, MFI |
3.7 |
g/10min |
ASTM D 1238 |
온도 |
190 |
°C |
- |
하중 |
2.16 |
kg |
- |
열적 특성 | 값 | 단위 | 시험규격 |
Other Standards[S] |
녹는점 |
106 |
°C |
ExxonMobil Method |
S: | These properties are reported by the producer according standards that are different to our defaults. |
광학 특성 | 값 | 단위 | 시험규격 |
ASTM 데이터 |
광택도 |
89 |
- |
ASTM D 2457 |
Other Standards[S] |
탁도 |
0.4 |
% |
ExxonMobil Method |
S: | These properties are reported by the producer according standards that are different to our defaults. |
기타 특성 | 값 | 단위 | 시험규격 |
Other Standards[S] |
밀도 |
889 |
kg/m³ |
ExxonMobil Method |
S: | These properties are reported by the producer according standards that are different to our defaults. |
기계적 성질 (필름) | 값 | 단위 | 시험규격 |
ASTM Data |
압출 유형 |
cast |
- |
- |
시편두께 |
0.0254 |
mm |
- |
Other Standards[S] |
항복강도, 평행 |
15.2 |
MPa |
ExxonMobil Method |
항복강도, 수직 |
13.1 |
MPa |
ExxonMobil Method |
파단시 강도, 평행 |
62.7 |
MPa |
ExxonMobil Method |
파단시 강도, 수직 |
35.9 |
MPa |
ExxonMobil Method |
파단시 신율 , 평행 |
440 |
% |
ExxonMobil Method |
파단시 신율 , 수직 |
790 |
% |
ExxonMobil Method |
S: | These properties are reported by the producer according standards that are different to our defaults. |
특징
생산 공정
필름 압출
특성
Copolymer
Certifications
RoHS
응용
포장
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com