Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Xtel® XE5030NA - PPS-GF - Chevron Phillips Chemical Co. LP

Material Data Center offers the following functions for Xtel® XE5030NA:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Xtel datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
성형 수축률, 평행 0.2 % ISO 294-4, 2577
성형 수축률, 수직 0.5 % ISO 294-4, 2577
용융 열전도율 0.18 W/(m K) -
ASTM 데이터
성형 수축률, 평행 0.002 mm/mm ASTM D 955
성형 수축률, 수직 0.005 mm/mm ASTM D 955
기계적 특성값단위시험규격
ISO 데이터
인장 강도 145 MPa ISO 527
굴곡 계수, 23°C 9000 MPa ISO 178
Izod충격강도, +23°C 45 kJ/m² ISO 180/1U
아이조드 충격은 노치, +23°C 10 kJ/m² ISO 180/1A
ASTM 데이터
인장 강도 124 MPa ASTM D 638
압축 강도 207 MPa ASTM D 695
굴곡 계수 8963 MPa ASTM D 790
굴곡 강도 207 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 112 J/m ASTM D 256
Izod충격강도, 1/8 in 854 J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 250 °C ISO 75-1/-2
선형 열팽창 계수, 평행 20 E-6/K ISO 11359-1/-2
선형 열팽창 계수, 수직 60 E-6/K ISO 11359-1/-2
두께 H인 제품의 난연성 V-0 class IEC 60695-11-10
테스트 두께 3.0 mm -
ASTM 데이터
UL94 난연성 V-0 - UL 94
테스트 두께 3.05 mm -
DTUL @ 264 psi 252 °C ASTM D 648
전기적 특성값단위시험규격
ISO 데이터
CTI 100 - IEC 60112
ASTM 데이터
전기 압력, 단기간의 19.7 kV/mm ASTM D 149
소산 인자, 1 MHz 0.009 - ASTM D 150
상대 유전율, 1 MHz 3.6 - ASTM D 150
부피 저항 1E15 Ohm*cm ASTM D 257
아크 저항 120 s ASTM D 495
기타 특성값단위시험규격
밀도 1510 kg/m³ ISO 1183
물에서의 흡수성, 24hr 0.05 % ASTM D 570
밀도 1510 kg/m³ ASTM D 792
특징
인도 유형
펠렛 (입자,알갱이), 자연 색상
특별 특성
고충격 또는 고충격 보강, 열안정성
특성
Low Odor
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.