Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Zedex® ZX-324V11T - PEEK - Wolf Kunststoff-Gleitlager GmbH

Material Data Center offers the following functions for Zedex® ZX-324V11T:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Zedex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
For more detailed information, please read our
or contact our representatives in your region.
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 4400 MPa ISO 527
인장 강도 113 MPa ISO 527
항복강도 113 MPa ISO 527
항복변형률 5 % ISO 527
파단시 강도 98 MPa ISO 527
파단시 신율 9 % ISO 527
굴곡 계수, 23°C 2940 MPa ISO 178
챠피 충격 강도, +23°C N kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 6.2 kJ/m² ISO 179/1eA
Ball indentation hardness 190 MPa ISO 2039-1
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 165 °C ISO 75-1/-2
두께 H인 제품의 난연성 V-0 class IEC 60695-11-10
테스트 두께 3.2 mm -
전기적 특성값단위시험규격
ISO 데이터
부피 저항 >1E13 Ohm*m IEC 62631-3-1
표면 저항 7.8E11 Ohm IEC 62631-3-2
전기 압력 26 kV/mm IEC 60243-1
기타 특성값단위시험규격
물에서의 흡수성 0.05 % ISO 62와 유사
밀도 1340 kg/m³ ISO 1183
특징
생산 공정
사출 성형
인도 유형
과립, 검정
특별 특성
U.V. 안정성 또는 기후 안정성
내화학성에
General Chemical Resistance
Certifications
Drinking water contact
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.