Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Cristal™ Renew 401-30 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Cristal™ Renew 401-30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Cristal datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 광학 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서

Eastman Cristal™ Renew copolyester 401-30 Natural is a high flow product that contains mold release for ease of

ejection. It is designed and engineered specifically for cosmetics packaging applications. With its unsurpassed

color and clarity and an unmatched ability to mold thick parts with improved gate aesthetics, Cristal Renew is

clearly a well-suited copolyester for premium cosmetics packaging. Other outstanding features of Cristal Renew

are excellent chemical resistance, high gloss, and improvements in processing such as faster cycle times, and

lower scrap rates. Cristal Renew is also ideally suited for two-shot molding techniques due to its lower processing

temperatures, very slow crystallization rate, and flow characteristics.

Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a

global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are

produced with ISCC certified circular content by mass balance allocation.


Processing/Physical Characteristics값단위시험규격
ASTM 데이터
성형 수축률, 평행 0.0035 mm/mm ASTM D 955
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2030 MPa ISO 527
항복강도 50 MPa ISO 527
항복변형률 4.3 % ISO 527
파단시 강도 39 MPa ISO 527
파단시 신율 20 % ISO 527
ASTM 데이터
인장탄성률 2036 MPa ASTM D 638
항복강도 50 MPa ASTM D 638
파단시 강도 24 MPa ASTM D 638
항복변형률 4.4 % ASTM D 638
파단시 신율 44 % ASTM D 638
굴곡 계수 1808 MPa ASTM D 790
굴곡 강도 66 MPa ASTM D 790
로크웰 경도 R 108 - ASTM D 785
아이조드 충격은 노치, 1/8 in 103 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 44 J/m ASTM D 256
온도 -40 °C -
Izod충격강도, 1/8 in N J/m ASTM D 256
열적 특성값단위시험규격
ASTM 데이터
DTUL @ 66 psi 68 °C ASTM D 648
DTUL @ 264 psi 61 °C ASTM D 648
광학 특성값단위시험규격
ASTM 데이터
탁도 0.4 % ASTM D 1003
광선 투겠淅 91.8 % ASTM D 1003
기타 특성값단위시험규격
밀도 1280 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 65 °C -
Pre-drying - Time 8 h -
용융수지온도 205 - 240 °C -
성형온도 16 - 38 °C -
특징
생산 공정
사출 성형, 기타 압출
인도 유형
자연 색상
특별 특성
고충격 또는 고충격 보강, 투명도
특성
High Gloss, Copolymer
내화학성에
General Chemical Resistance
Certifications
ISCC Plus
응용
포장
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.