Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Diakon CRG800 - PMMA - Lucite International

Material Data Center offers the following functions for Diakon CRG800:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Diakon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 광학 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 2.3 g/10min ISO 1133
성형 수축률, 평행 0.4 % ISO 294-4, 2577
성형 수축률, 수직 0.8 % ISO 294-4, 2577
기계적 특성값단위시험규격
ISO 데이터
인장 강도 59 MPa ISO 527
파단시 신율 18 % ISO 527
굴곡 계수, 23°C 2500 MPa ISO 178
챠피 충격 강도, +23°C 30 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 2.7 kJ/m² ISO 179/1eA
아이조드 충격은 노치, +23°C 2.8 kJ/m² ISO 180/1A
로크웰 경도 M 71 - ISO 2039-2
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 92 °C ISO 75-1/-2
비카트 연화 온도, A 111 °C ISO 306
비카트 연화 온도, B 101 °C ISO 306
두께 H인 제품의 난연성 HB class IEC 60695-11-10
ASTM 데이터
열팽창 계수, 평행 100 E-6/K ASTM D 696
광학 특성값단위시험규격
ASTM 데이터
탁도 2 % ASTM D 1003
광선 투겠淅 90 % ASTM D 1003
굴절 지수 1.49 - ASTM D 542
기타 특성값단위시험규격
물에서의 흡수성 0.3 % ISO 62와 유사
밀도 1160 kg/m³ ISO 1183
밀도 1160 kg/m³ ASTM D 792
특징
생산 공정
사출 성형, 기타 압출
특별 특성
고충격 또는 고충격 보강, 투명도
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.