Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DURANEX® 2000 - PBT - Polyplastics

Check here, which other Duranex datasheets, application examples or technical articles are available in Material Data Center

기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - Processing Recommendation Injection Molding - 도표

Any use of this information falls under the rules of our disclaimer.

기계적 특성	값	단위	시험규격
ISO 데이터
인장 강도	60	MPa	ISO 527
파단시 평균신율	20	%	ISO 527
굴곡 계수, 23°C	2500	MPa	ISO 178
굴곡 강도	89	MPa	ISO 178
챠피 노치드 충격 강도, +23°C	3.2	kJ/m²	ISO 179/1eA
로크웰 경도	M 90	-	ISO 2039-2

열적 특성	값	단위	시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa	73	°C	ISO 75-1/-2
선형 열팽창 계수, 평행	110	E-6/K	ISO 11359-1/-2
선형 열팽창 계수, 수직	110	E-6/K	ISO 11359-1/-2
두께 H인 제품의 난연성	HB	class	IEC 60695-11-10
Yellow Card 유효한	예	-	-

전기적 특성	값	단위	시험규격
ISO 데이터
부피 저항	5E14	Ohm*m	IEC 62631-3-1
전기 압력	17	kV/mm	IEC 60243-1

기타 특성	값	단위	시험규격
밀도	1310	kg/m³	ISO 1183

Processing Recommendation Injection Molding	값	단위	시험규격
성형온도	75	°C	-
Zone 1	200	°C	-
Zone 2	220	°C	-
Zone 3	240	°C	-
Zone 4	250	°C	-
Injection speed	50	mm/s	-

도표

특징

생산 공정

사출 성형

응용

범용

지역별 검색

쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.