Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Flomat 513/15 - UP-GF15 - Devi Polymers Private Limited

Material Data Center offers the following functions for Flomat 513/15:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Flomat datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
Other Standards[S]
성형 수축률, 평행 0.3 % BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
기계적 특성값단위시험규격
Other Standards[S]
인장 강도 29 MPa BS-2782
굴곡 강도 118 MPa BS-2782
압축 강도 132 MPa BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
기타 특성값단위시험규격
Other Standards[S]
물에서의 흡수성 0.2 % BS-2782
밀도 1800 kg/m³ BS-2782
S: These properties are reported by the producer according standards that are different to our defaults.
특징
생산 공정
Compression Molding
인도 유형
쉬트 몰딩 콤파운드
지역별 검색
쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.