Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORMPOLY GPP20 - PP-GF20 - Formulated Polymers Limited

Material Data Center offers the following functions for FORMPOLY GPP20:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Formpoly datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
용융 흐름성, MFI 5 g/10min ASTM D 1238
성형 수축률, 평행 0.005 mm/mm ASTM D 955
기계적 특성값단위시험규격
ASTM 데이터
인장 강도 55 MPa ASTM D 638
파단시 신율 4 % ASTM D 638
굴곡 계수 3000 MPa ASTM D 790
굴곡 강도 80 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 49.1 J/m ASTM D 256
열적 특성값단위시험규격
ASTM 데이터
DTUL @ 66 psi 130 °C ASTM D 648
DTUL @ 264 psi 80 °C ASTM D 648
기타 특성값단위시험규격
밀도 1060 kg/m³ ASTM D 792
특징
인도 유형
펠렛 (입자,알갱이)
부가물
윤활제
특별 특성
열안정성
특성
Chemically Coupled Reinforcement, Low Odor, Thermal Stability
응용
자동차의
지역별 검색
쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.