Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HOSTAFORM® C 9021 GV1/30 3134 - POM-GF30 - Celanese

Check here, which other Hostaform datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

POM copolymer Injection molding type, reinforced with ca 26 % glass fibers; high resistance to thermal and oxidative degradation; reduced thermal expansion and shrinkage. Product is compliant with European Food Regulation EU 10/2011 and FDA Food Regulation FDA21CFR 177.2470 Ranges of applications: For molded parts with very high strength and rigidity as well as higher hardness.

Flammability @1.6mm nom. thickn.	HB	-
Flammability at thickness h (3.18 mm)	HB	UL recognition (h)

Processing/Physical Characteristics	값	단위	시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR	4	cm³/10min	ISO 1133
온도	190	°C	-
하중	2.16	kg	-
성형 수축률, 평행	0.6	%	ISO 294-4, 2577
성형 수축률, 수직	1.0	%	ISO 294-4, 2577
용융 밀도	1350	kg/m³	-
용융 열전도율	0.215	W/(m K)	-
용융 비열용량	1810	J/(kg K)	-
효율적 열전도도	6.51E-8	m²/s	-
이형온도	140	°C	-

기계적 특성	값	단위	시험규격
ISO 데이터
인장탄성률	9200	MPa	ISO 527
파단시 강도	135	MPa	ISO 527
파단시 신율	2.5	%	ISO 527
챠피 충격 강도 , +23°C	30	kJ/m²	ISO 179/1eU
챠피 충격 강도, -30°C	35	kJ/m²	ISO 179/1eU
챠피 노치드 충격 강도, +23°C	8	kJ/m²	ISO 179/1eA
챠피 노치드 충격 강도, -30°C	8	kJ/m²	ISO 179/1eA

열적 특성	값	단위	시험규격
ISO 데이터
녹는점, 10°C/min	166	°C	ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa	160	°C	ISO 75-1/-2
하중하에서의 변형온도, 8.00 MPa	125	°C	ISO 75-1/-2
선형 열팽창 계수, 평행	40	E-6/K	ISO 11359-1/-2
선형 열팽창 계수, 수직	80	E-6/K	ISO 11359-1/-2
1.5mm 평균두께에서의 난연성	HB	class	IEC 60695-11-10
테스트 두께	1.6	mm	-
두께 H인 제품의 난연성	HB	class	IEC 60695-11-10
테스트 두께	3.2	mm	-
Yellow Card 유효한	예	-	-

전기적 특성	값	단위	시험규격
ISO 데이터
상대 유전율, 100Hz	4.3	-	IEC 62631-2-1
상대 유전뮬, 1MHz	4.3	-	IEC 62631-2-1
소산 인자, 100Hz	30	E-4	IEC 62631-2-1
소산 인자, 1MHz	60	E-4	IEC 62631-2-1
부피 저항	1E12	Ohm*m	IEC 62631-3-1
표면 저항	1E14	Ohm	IEC 62631-3-2
전기 압력	40	kV/mm	IEC 60243-1

기타 특성	값	단위	시험규격
물에서의 흡수성	0.9	%	ISO 62와 유사
조건에서의 흡습성	0.17	%	ISO 62와 유사
밀도	1600	kg/m³	ISO 1183

도표

특징

생산 공정

사출 성형

인도 유형

펠렛 (입자,알갱이)

부가물

이형제

특별 특성

열안정성

특성

Copolymer

내화학성에

Oxidation Resistance

Certifications

Food contact, Food approval 10/2011, Food approval FDA 21 CFR, Drinking water contact

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.