Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hostalen CRP 100 RCD BLACK - (PE-HD) - LyondellBasell Industries

Material Data Center offers the following functions for Hostalen CRP 100 RCD BLACK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Hostalen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics단위시험규격
ISO 데이터
용융 흐름성, MFI 0.23 g/10min ISO 1133
온도 190 °C -
负荷 5 kg -
기계적 특성단위시험규격
ISO 데이터
인장탄성률 1100 MPa ISO 527
항복강도 23 MPa ISO 527
항복변형률 9 % ISO 527
파단시 신율 650 % ISO 527
탄성변형률, 1h 850 MPa ISO 899-1
챠피 노치드 충격 강도, +23°C 26 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 13 kJ/m² ISO 179/1eA
쇼어 D 경도 63 - ISO 7619-1
열적 특성단위시험규격
ISO 데이터
녹는점, 10°C/min 129 °C ISO 11357-1/-3
비카트 연화 온도, B 74 °C ISO 306
기타 특성단위시험규격
밀도 958 kg/m³ ISO 1183
Bulk density 580 kg/m³ -
Processing Recommendation Injection Molding단위시험규격
용융수지온도 190 - 230 °C -
Processing Recommendation Extrusion단위시험규격
용융수지온도 190 - 230 °C -
특징
생산 공정
사출 성형, Pipe/Tube Extrusion, 시트 압출, Compression Molding
인도 유형
펠렛 (입자,알갱이), 검정
특별 특성
U.V. 안정성 또는 기후 안정성
특성
Creep Resistance, Thermal Stability, Weldable
내화학성에
General Chemical Resistance, Environmental Stress Crack Resistance, Hydrolytically Stable
Certifications
Food contact, Drinking water contact
응용
건물 건설
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.