Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of K-Resin® KR03E - SB - INEOS Styrolution

Material Data Center offers the following functions for K-Resin® KR03E:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other K-Resin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics단위시험규격
ISO 데이터
용융 흐름성, MFI 7.5 g/10min ISO 1133
온도 200 °C -
负荷 5 kg -
성형 수축률, 평행 0.7 % ISO 294-4, 2577
기계적 특성단위시험규격
ISO 데이터
인장탄성률 1500 MPa ISO 527
항복강도 25 MPa ISO 527
파단시 강도 70 MPa ISO 527
파단시 신율 170 % ISO 527
굴곡 계수, 23°C 1400 MPa ISO 178
굴곡 강도 30 MPa ISO 178
챠피 노치드 충격 강도, +23°C 2 kJ/m² ISO 179/1eA
쇼어 D 경도 63 - ISO 7619-1
열적 특성단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 61 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 76 °C ISO 75-1/-2
비카트 연화 온도, A 88 °C ISO 306
비카트 연화 온도, B 60 °C ISO 306
광학 특성단위시험규격
ASTM 데이터
탁도 1.5 % ASTM D 1003
광선 투겠淅 91 % ASTM D 1003
기타 특성단위시험규격
조건에서의 흡습성 0.07 % ISO 62와 유사
밀도 1010 kg/m³ ISO 1183
Processing Recommendation Injection Molding단위시험규격
용융수지온도 180 - 240 °C -
성형온도 30 - 50 °C -
특징
생산 공정
사출 성형, 시트 압출, 중공 성형, 열성형
특별 특성
고충격 또는 고충격 보강, 투명도
특성
Blending Resin, High Gloss, Copolymer
Certifications
Food contact
응용
IT / 비즈니스 기계, 의료, 포장, 장난감
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.