Any use of this information falls under the rules of our
disclaimer.
제품 설명서
KURARITY is non-crystalline block copolymer and does not have melting point.
All the KURARITY grades show similar low temperature properties which result from Tg of
poly (n-butyl acrylate) or poly (n-butyl acrylate/2-ethylhexyl acrylate) and heat resistance
from Tg of PMMA.
LA series : n-butyl acrylate based block copolymers.
Suitable Applications: For Molding, Compound, Additives.
| Processing/Physical Characteristics | 값 | 단위 | 시험규격 |
| ISO 데이터 |
| 용융 흐름성, MFI |
1.5 |
g/10min |
ISO 1133 |
| 온도 |
190 |
°C |
- |
| 负荷 |
2.16 |
kg |
- |
| 기계적 특성 | 값 | 단위 | 시험규격 |
| ISO 데이터 |
| 인장 강도 |
17 |
MPa |
ISO 527 |
| 굴곡 계수, 23°C |
750 |
MPa |
ISO 178 |
| 챠피 노치드 충격 강도, +23°C |
30 |
kJ/m² |
ISO 179/1eA |
| 인장 강도 |
25 |
MPa |
ISO 37 |
| 쇼어 A 경도 |
90 |
- |
ISO 7619-1 |
| 쇼어 D 경도 |
47 |
- |
ISO 7619-1 |
| Other Standards[S] |
| 100% 변형시 강도 |
19 |
MPa |
ISO 37 |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| 열적 특성 | 값 | 단위 | 시험규격 |
| Other Standards[S] |
| 열전도율, 솔리드 |
0.17 |
W/(m K) |
ASTM E 1530 |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| 전기적 특성 | 값 | 단위 | 시험규격 |
| Other Standards[S] |
| 소산 인자, 60 Hz |
0.0394 |
- |
JIS C 2138 |
| 소산 인자, 1 MHz |
0.0448 |
- |
JIS C 2138 |
| 상대 유전율, 60 Hz |
4.56 |
- |
JIS C 2138 |
| 상대 유전율, 1 MHz |
3.68 |
- |
JIS C 2138 |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| 광학 특성 | 값 | 단위 | 시험규격 |
| ISO Data |
| 탁도 |
2 |
- |
ISO 14782 |
| Other Standards[S] |
| 광선 투겠淅 |
93 |
% |
ISO 13468-1 |
| S: | These properties are reported by the producer according standards that are different to our defaults. |
| 기타 특성 | 값 | 단위 | 시험규격 |
| 밀도 |
1120 |
kg/m³ |
ISO 1183 |
| Processing Recommendation Injection Molding | 값 | 단위 | 시험규격 |
| Pre-drying - Temperature |
70 - 80 |
°C |
- |
| Pre-drying - Time |
4 |
h |
- |
| 용융수지온도 |
200 - 230 |
°C |
- |
| 성형온도 |
20 - 40 |
°C |
- |
| Screw speed |
<100 |
rpm |
- |
| Back pressure |
0 - 5 |
MPa |
- |
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이)
특별 특성
U.V. 안정성 또는 기후 안정성, 투명도
특성
Blending Resin, Low Odor, Copolymer
내화학성에
Acid Resistance, Alkali Resistance, Oil Resistance
응용
자동차의, 전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com
