Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makroblend® UT403 - (PC+PET)-I - Covestro Deutschland AG

Material Data Center offers the following functions for Makroblend® UT403:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makroblend datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 테스트 견본 생산 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
  • (PC+PET) blend, unreinforced
  • UV-stabilized
  • impact modified
  • high flow
  • injection molding grade. Good impact strength, dimensional stability and chemical resistance. UL746C f1 rated.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 34 cm³/10min ISO 1133
온도 270 °C -
하중 5 kg -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2400 MPa ISO 527
항복강도 58 MPa ISO 527
항복변형률 5 % ISO 527
파단시 평균신율 >50 % ISO 527
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 98 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 124 °C ISO 75-1/-2
선형 열팽창 계수, 평행 70 E-6/K ISO 11359-1/-2
선형 열팽창 계수, 수직 80 E-6/K ISO 11359-1/-2
1.5mm 평균두께에서의 난연성 HB class IEC 60695-11-10
두께 H인 제품의 난연성 HB class IEC 60695-11-10
테스트 두께 3.0 mm -
전기적 특성값단위시험규격
ISO 데이터
상대 유전율, 100Hz 3.2 - IEC 62631-2-1
상대 유전뮬, 1MHz 3.1 - IEC 62631-2-1
소산 인자, 100Hz 17 E-4 IEC 62631-2-1
소산 인자, 1MHz 150 E-4 IEC 62631-2-1
부피 저항 >1E13 Ohm*m IEC 62631-3-1
표면 저항 >1E15 Ohm IEC 62631-3-2
전기 압력 34 kV/mm IEC 60243-1
CTI 200 - IEC 60112
기타 특성값단위시험규격
물에서의 흡수성 0.5 % ISO 62와 유사
조건에서의 흡습성 0.2 % ISO 62와 유사
밀도 1230 kg/m³ ISO 1183
테스트 견본 생산값단위시험규격
ISO 데이터
사출성형: 용융수지온도 270 °C ISO 294
사출성형: 금형온도 70 °C ISO 294
사출성형: 사출속도 200 mm/s ISO 294
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 110 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.01 % -
용융수지온도 260 - 280 °C -
성형온도 60 - 80 °C -
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이)
특별 특성
고충격 또는 고충격 보강, U.V. 안정성 또는 기후 안정성
특성
Blending Resin
내화학성에
General Chemical Resistance
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
기타 정보
사E성
PREPROCESSING
Max. Water content: 0.01 %
Drying temperature: 110 °C
Drying time:
Circulating air drying oven (50 % fresh air) 4-12 h
Fresh air dryer (high speed dryer) 2-4 h
Dry air dryer 2-4 h

PROCESSING
Melt temperature: 260-280 °C
Mold temperature: 60-80 °C

Use open nozzle.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.