Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of MALECCA K-100 - ABS - Denka Company Limited

Material Data Center offers the following functions for MALECCA K-100:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Malecca datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 8 g/10min ISO 1133
온도 220 °C -
负荷 10 kg -
성형 수축률, 평행 0.5 % ISO 294-4, 2577
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2500 MPa ISO 527
항복강도 48 MPa ISO 527
파단시 강도 38 MPa ISO 527
굴곡 계수, 23°C 2450 MPa ISO 178
굴곡 강도 76 MPa ISO 178
챠피 노치드 충격 강도, +23°C 20 kJ/m² ISO 179/1eA
로크웰 경도 R 113 - ISO 2039-2
ASTM 데이터
굴곡 계수 2350 MPa ASTM D 790
굴곡 강도 74 MPa ASTM D 790
로크웰 경도 R 114 - ASTM D 785
아이조드 충격은 노치, 1/8 in 196 J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 93 °C ISO 75-1/-2
비카트 연화 온도, B 113 °C ISO 306
두께 H인 제품의 난연성 HB class IEC 60695-11-10
Yellow Card 유효한 예 - -
ASTM 데이터
DTUL @ 264 psi 103 °C ASTM D 648
비카트 연화 온도 113 °C ASTM D 1525
기타 특성값단위시험규격
밀도 1060 kg/m³ ISO 1183
밀도 1050 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 90 °C -
Pre-drying - Time 3 - 4 h -
성형온도 50 - 80 °C -
Zone 1 200 - 220 °C -
Zone 2 210 - 240 °C -
Zone 3 220 - 250 °C -
Nozzle temperature 220 - 245 °C -
Screw speed 50 - 80 rpm -
Back pressure 0.5 - 1 MPa -
특징
생산 공정
사출 성형
특별 특성
열안정성
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.