Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Platamid® M 2468 Pellets - PA* - ARKEMA

Material Data Center offers the following functions for Platamid® M 2468 Pellets:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Platamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Platamid® M 2468 Pellets
Copolyamide Hot Melt Adhesive / Extrusion Applications

Platamid® M 2468 is a standard thermoplastic copolyamide hot melt adhesive available in pellet form. This low to medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion.
Platamid®  M 2468 offers a good adhesion at low fusing conditions to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc).
Platamid®  M 2468 has good dry cleaning resistance and washing resistance up to 60°C.

The biobased carbon content of Platamid® M 2468 is measured at 20% according to ASTM D6866.




AVAILABLE GRADES
This product is available:
- Dried with optical brightener (M 2468 TA)
- Un-dried with optical brightener (M 2468 FA)
PACKAGING
- Platamid®M 2468 TA is delivered in 25 kg sealed bags and 500kg sealed big bags (GRVS).
- Platamid® M 2468 FA is delivered in 500kg sealed rigid containers (GRVC) and 500kg sealed big bags (GRVS).
These grades are ready to be processed.
SHELF LIFE
Two years from the date of delivery. For any use above this limit, please refer to our technical services.
RENEWABLE CARBON CONTENT 
20% (according to ASTM D6866)
Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 26 / * cm³/10min ISO 1133
온도 160 / * °C -
하중 2.16 / * kg -
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 102 / * °C ISO 11357-1/-3
기타 특성건조/응축단위시험규격
밀도 1060 / - kg/m³ ISO 1183
Biobased content 25 % -
특징
생산 공정
필름 압출
인도 유형
펠렛 (입자,알갱이)
특성
Good Adhesion, Copolymer
Certifications
Contains renewable resources
응용
Monofilament, Multifilament
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.