Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RTP 4099 X 112302 - PPA-MEF(Fe) - RTP Company

Material Data Center offers the following functions for RTP 4099 X 112302:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other RTP datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 전기적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
기계적 특성값단위시험규격
ASTM 데이터
인장탄성률 2896 MPa ASTM D 638
인장 강도 76.5 MPa ASTM D 638
굴곡 계수 2896 MPa ASTM D 790
굴곡 강도 100 MPa ASTM D 790
전기적 특성값단위시험규격
ASTM 데이터
표면 저항 1E8 Ohm ASTM D 257
부피 저항 1000 Ohm*cm ASTM D 257
기타 특성값단위시험규격
밀도 1190 kg/m³ ASTM D 792
Moisture Content 0.04 % -
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 107 °C -
Pre-drying - Time 6 h -
용융수지온도 313 - 329 °C -
성형온도 135 - 163 °C -
Injection pressure 68.9 - 124 MPa -
특징
생산 공정
사출 성형
특별 특성
증가된 전기전도성, 고충격 또는 고충격 보강
특성
EMI Attenuation/Shielding
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.