Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® Clear G820 Rnew® - PA* - ARKEMA

Material Data Center offers the following functions for Rilsan® Clear G820 Rnew®:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
PA,,MHT,C14-020

Rilsan® Clear  G820 Rnew® is a high performance transparent polyamide with outstanding chemical resistance and stress cracking resistance.This grade has been designed for injection molding applications.

According to ASTM D6866, the biobased carbon content is measured at 62%.



Main applications:
  • Optic
  • Electonics
  • Domestic appliances

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.
Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 8 / * cm³/10min ISO 1133
온도 275 / * °C -
하중 2.16 / * kg -
성형 수축률, 평행 0.6 / * % ISO 294-4, 2577
성형 수축률, 수직 0.7 / * % ISO 294-4, 2577
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 - / 1665 MPa ISO 527
항복강도 - / 66 MPa ISO 527
항복변형률 - / 7 % ISO 527
파단시 평균신율 - / >50 % ISO 527
챠피 노치드 충격 강도, +23°C - / 6 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C - / 9 kJ/m² ISO 179/1eA
쇼어 D 경도 76 / * - ISO 7619-1
열적 특성건조/응축단위시험규격
ISO 데이터
유리 전이 온도, 10 °C/min 101 / * °C ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa 73 / * °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 85 / * °C ISO 75-1/-2
기타 특성건조/응축단위시험규격
물에서의 흡수성 2.45 / * % ISO 62와 유사
조건에서의 흡습성 1.16 / * % ISO 62와 유사
밀도 1000 / 1000 kg/m³ ISO 1183
Biobased content 60 % -
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이)
특별 특성
투명도
내화학성에
General Chemical Resistance, Environmental Stress Crack Resistance
Certifications
Contains renewable resources
응용
전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
기타 정보
사E성
Processing conditions:
- Typical melt temperature  (Min / Recommaneded / Max)  : 260°C / 280°C / 300°C
- Typical mold temperature  : 20 - 80 °C
- Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 80°C

 

Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.