Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® HT CZM 30 BLACK TLD - PA*-GF30 - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

PA11/10T,GF30,MHL,C16-090  

Rilsan® HT CZM 30 BLACK TLD is a polyphthalamide produced from a renewable source. This grade is glass fiber-reinforced, formulated and designed for injection molding for high-temperature applications.

According to ASTM D6866, the biobased carbon content is measured at 68%.

Main applications:

• Automotive & transportation quick connector for flexible fuels and powertrain applications
• High-temperature injection molding

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.

Processing/Physical Characteristics	건조/응축	단위	시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR	15 / *	cm³/10min	ISO 1133
온도	300 / *	°C	-
하중	2.16 / *	kg	-
성형 수축률, 평행	0.3 / *	%	ISO 294-4, 2577
성형 수축률, 수직	1.0 / *	%	ISO 294-4, 2577

기계적 특성	건조/응축	단위	시험규격
ISO 데이터
인장탄성률	8700 / -	MPa	ISO 527
파단시 강도	151 / -	MPa	ISO 527
파단시 신율	2.6 / -	%	ISO 527
챠피 충격 강도 , +23°C	57 / -	kJ/m²	ISO 179/1eU
챠피 충격 강도, -30°C	54 / -	kJ/m²	ISO 179/1eU
챠피 노치드 충격 강도, +23°C	9.1 / -	kJ/m²	ISO 179/1eA
챠피 노치드 충격 강도, -30°C	7.4 / -	kJ/m²	ISO 179/1eA

열적 특성	건조/응축	단위	시험규격
ISO 데이터
녹는점, 10°C/min	255 / *	°C	ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa	220 / *	°C	ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa	240 / *	°C	ISO 75-1/-2

기타 특성	건조/응축	단위	시험규격
물에서의 흡수성	1.13 / *	%	ISO 62와 유사
조건에서의 흡습성	0.22 / *	%	ISO 62와 유사
밀도	1300 / 1300	kg/m³	ISO 1183
Biobased content	67	%	-

도표

특징

생산 공정

사출 성형

인도 유형

펠렛 (입자,알갱이), 검정

부가물

이형제

특별 특성

가시광선 안정성, U.V. 안정성 또는 기후 안정성, 열안정성

Certifications

Contains renewable resources

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧

기타 정보

사E성

Injection molding process conditions :
- Typical melt temperature (Min / Recommanded / Maxi) : 270°C  / 280°C / 320°C.
- Typical mold temperature : 90 - 110°C.
- Drying time and temperature (only for bags opened for more than two hours) : 4 - 8 hours / 100 - 110°C.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.