Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SAXALAC™ 835U - ABS - SAX Polymers Industrie GmbH

Material Data Center offers the following functions for SAXALAC™ 835U:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Saxalac datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 35 cm³/10min ISO 1133
온도 220 °C -
하중 10 kg -
성형 수축률, 평행 0.6 % ISO 294-4, 2577
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2400 MPa ISO 527
인장 강도 40 MPa ISO 527
파단시 신율 10 % ISO 527
챠피 충격 강도, +23°C 100 kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C 65 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 22 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 7 kJ/m² ISO 179/1eA
Izod충격강도, +23°C 100 kJ/m² ISO 180/1U
아이조드 충격은 노치, +23°C 22 kJ/m² ISO 180/1A
아이조드 충격은 노치 7 kJ/m² ISO 180/1A
온도 -30 °C -
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 94 °C ISO 75-1/-2
비카트 연화 온도, B 95 °C ISO 306
두께 H인 제품의 난연성 HB class IEC 60695-11-10
테스트 두께 0.8 mm -
기타 특성값단위시험규격
밀도 1040 kg/m³ ISO 1183
Moisture Content 0.2 % -
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이), 자연 색상
특별 특성
정전기 방지, 고충격 또는 고충격 보강, 가시광선 안정성, 열안정성
특성
Low Odor
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.