Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Styroflex® ECO 2G66 BC60 - SB - INEOS Styrolution

Material Data Center offers the following functions for Styroflex® ECO 2G66 BC60:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Styroflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 광학 특성 - 기타 특성 - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Carbon Footprint Reduction vs Fossil-Based (3rd party validated): 77 % (ISO 14044)
Attributed Content of ISCC-certified Bio-Circular Sources: 60 %
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 13 cm³/10min ISO 1133
온도 200 °C -
하중 5 kg -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 70 MPa ISO 527
항복강도 3 MPa ISO 527
항복변형률 50 % ISO 527
파단시 평균신율 500 % ISO 527
파단시 강도 9 MPa ISO 527
파단시 신율 450 % ISO 527
굴곡 계수, 23°C 60 MPa ISO 178
굴곡 강도 2 MPa ISO 178
챠피 노치드 충격 강도, +23°C N kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 2 kJ/m² ISO 179/1eA
쇼어 A 경도 86 - ISO 7619-1
쇼어 D 경도 30 - ISO 7619-1
열적 특성값단위시험규격
ISO 데이터
비카트 연화 온도, A 39 °C ISO 306
광학 특성값단위시험규격
ASTM 데이터
탁도 10 % ASTM D 1003
광선 투겠淅 80 % ASTM D 1003
Other Standards[S]
굴절 지수 1.57 - ISO 489
S: These properties are reported by the producer according standards that are different to our defaults.
기타 특성값단위시험규격
물에서의 흡수성 0.07 % ISO 62와 유사
밀도 998 kg/m³ ISO 1183
Processing Recommendation Extrusion값단위시험규격
용융수지온도 170 - 240 °C -
성형온도 30 - 50 °C -
특징
생산 공정
사출 성형, Blown Film Extrusion, 필름 압출
인도 유형
펠렛 (입자,알갱이)
특별 특성
고충격 또는 고충격 보강, 투명도, 멸균, 에틸렌 산화물 멸균(EtO), Gamma irradiation sterilization
내화학성에
Radiation Resistance
Certifications
Contains renewable resources, Food contact, ISCC Plus
응용
의료, 포장
지역별 검색
짱쨌쨈, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.