Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultradur® B 4330 G6 HR High Speed - PBT-I-GF30 - BASF

Check here, which other Ultradur datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - 물질의 비성질 - Processing Recommendation Injection Molding - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

Easy flowing injection-moulding grade containing 30% glass-fibres, for rigid,tough and dimensionally stable technical parts, used in applications with highest demands on hydrolysis resistance such es automotive connectors and housings for electronic units under the hood.
The black colored product Ultradur® B4330 G6 HR High Speed BK15045 has a LS coloration (Laser Sensitive) and can be marked with Nd:YAG lasers.


Abbreviated designation according to ISO 1043: PBT-I-GF30

Processing/Physical Characteristics	값	단위	시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR	28	cm³/10min	ISO 1133
온도	275	°C	-
하중	2.16	kg	-
성형 수축률, 평행	0.4	%	ISO 294-4, 2577
성형 수축률, 수직	1.0	%	ISO 294-4, 2577

기계적 특성	값	단위	시험규격
ISO 데이터
인장탄성률	8880	MPa	ISO 527
파단시 강도	130	MPa	ISO 527
파단시 신율	2.6	%	ISO 527
챠피 충격 강도 , +23°C	68	kJ/m²	ISO 179/1eU
챠피 충격 강도, -30°C	52	kJ/m²	ISO 179/1eU
챠피 노치드 충격 강도, +23°C	9	kJ/m²	ISO 179/1eA
챠피 노치드 충격 강도, -30°C	7.8	kJ/m²	ISO 179/1eA

열적 특성	값	단위	시험규격
ISO 데이터
녹는점, 10°C/min	223	°C	ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa	205	°C	ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa	223	°C	ISO 75-1/-2
1.5mm 평균두께에서의 난연성	HB	class	IEC 60695-11-10
테스트 두께	1.5	mm	-
Yellow Card 유효한	예	-	-
두께 H인 제품의 난연성	HB	class	IEC 60695-11-10
테스트 두께	0.8	mm	-
Yellow Card 유효한	예	-	-

기타 특성	값	단위	시험규격
밀도	1500	kg/m³	ISO 1183

물질의 비성질	값	단위	시험규격
ISO 데이터
점도수	85	cm³/g	ISO 307, 1157, 1628

Processing Recommendation Injection Molding	값	단위	시험규격
Pre-drying - Temperature	80 - 120	°C	-
Pre-drying - Time	4	h	-
Processing humidity	≤0.04	%	-
용융수지온도	250 - 280	°C	-
성형온도	60 - 100	°C	-

도표

특징

생산 공정

사출 성형

특별 특성

고충격 또는 고충격 보강

내화학성에

Hydrolytically Stable

응용

자동차의, 전기 및 전자

기타 정보

사E성

PREPROCESSING
Pre/Post-processing, max. allowed water content: .04 %
Pre/Post-processing, Pre-drying, Temperature: 80 - 120 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 250 - 280 °C
injection molding, Melt temperature, recommended: 260 °C
injection molding, Mold temperature, range: 60 - 100 °C
injection molding, Mold temperature, recommended: 80 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.