Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrafuse TPU 80A LF - TPU - BASF

Material Data Center offers the following functions for Ultrafuse TPU 80A LF:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultrafuse datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - 3D Data
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 82.5 cm³/10min ISO 1133
온도 210 °C -
하중 10 kg -
기계적 특성값단위시험규격
ISO 데이터
70 C, 영구 압축줄음율, 24h 52 % ISO 815
내마모성 56 mm³ ISO 4649
쇼어 A 경도 89 - ISO 7619-1
쇼어 D 경도 35 - ISO 7619-1
열적 특성값단위시험규격
ISO 데이터
유리 전이 온도, 10 °C/min -44 °C ISO 11357-1/-2
기타 특성값단위시험규격
밀도 1100 kg/m³ ISO 1183
3D Data값단위시험규격
Other Standards[S]
파단시 강도, flat 35 MPa ISO 527
파단시 강도, upright 7 MPa ISO 527
파단시 신율 , flat 610 % ISO 527
파단시 신율 , upright 230 % ISO 527
챠피 충격 강도, -30°C, flat 0 kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C, on-edge 0 kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C, upright 0 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C, flat 0 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, +23°C, on-edge 0 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, +23°C, upright 0 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C, flat 0 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C, on-edge 0 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C, upright 0 kJ/m² ISO 179/1eA
아이조드 충격은 노치, +23°C, flat 0 kJ/m² ISO 180/1A
아이조드 충격은 노치, +23°C, on-edge 0 kJ/m² ISO 180/1A
아이조드 충격은 노치, +23°C, upright 0 kJ/m² ISO 180/1A
50% 변형시 강도 , flat 5.8 MPa ISO 527
50% 변형시 강도 , upright 4.6 MPa ISO 527
100% 변형시 강도 , flat 6.9 MPa ISO 527
100% 변형시 강도 , upright 5.4 MPa ISO 527
200% 변형시 강도 , flat 11.5 MPa ISO 527
부피 저항, flat 2.3E10 Ohm*m IEC 62631-3-1
부피 저항, on-edge 1.6E10 Ohm*m IEC 62631-3-1
부피 저항, upright 1.6E10 Ohm*m IEC 62631-3-1
S: These properties are reported by the producer according standards that are different to our defaults.
특징
생산 공정
Additive Manufacturing
인도 유형
Monofilament
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.