Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VECTRA® S135 - LCP-GF35 - Celanese

Check here, which other Vectra datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

35% glass reinforced Vectra grade with very low outgassing, very high heat deflection temperature (335°C) and stiffness. Typical applications are lamp sockets, lens holders for beamers, electrical and electronic parts like connectors, relays, switches, coil bobbins and also under the hood applications. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant UL-Listing V-0 in natural at 0.28mm thickness per UL 94 flame testing. Relative-Temperature-Index (RTI) according to UL 746B: electrical 130°C, mechanical 130°C. UL = Underwriters Laboratories (USA)

Flammability at thickness h

V-0

-

Processing/Physical Characteristics	값	단위	시험규격
ISO 데이터
성형 수축률, 평행	0.1	%	ISO 294-4, 2577
성형 수축률, 수직	0.4	%	ISO 294-4, 2577

기계적 특성	값	단위	시험규격
ISO 데이터
인장탄성률	16000	MPa	ISO 527
파단시 강도	150	MPa	ISO 527
파단시 신율	1.3	%	ISO 527
챠피 노치드 충격 강도, +23°C	14	kJ/m²	ISO 179/1eA

열적 특성	값	단위	시험규격
ISO 데이터
녹는점, 10°C/min	350	°C	ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa	340	°C	ISO 75-1/-2
하중하에서의 변형온도, 8.00 MPa	267	°C	ISO 75-1/-2
선형 열팽창 계수, 평행	5.8	E-6/K	ISO 11359-1/-2
선형 열팽창 계수, 수직	57.5	E-6/K	ISO 11359-1/-2
두께 H인 제품의 난연성	V-0	class	IEC 60695-11-10

전기적 특성	값	단위	시험규격
ISO 데이터
상대 유전뮬, 1MHz	3.5	-	IEC 62631-2-1
소산 인자, 1MHz	90	E-4	IEC 62631-2-1
부피 저항	>1E13	Ohm*m	IEC 62631-3-1
표면 저항	>1E15	Ohm	IEC 62631-3-2
전기 압력	37	kV/mm	IEC 60243-1

기타 특성	값	단위	시험규격
물에서의 흡수성	0.004	%	ISO 62와 유사
조건에서의 흡습성	0.007	%	ISO 62와 유사
밀도	1670	kg/m³	ISO 1183

도표

특징

인도 유형

자연 색상

특별 특성

난연성

응용

전기 및 전자

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.