Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Venelene® FD-0348 - (PE-LD) - Poliolefinas Internacionales, C.A.

Material Data Center offers the following functions for Venelene® FD-0348:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Venelene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 광학 특성 - 기타 특성 - 기계적 성질 (필름)
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
용융 흐름성, MFI 3.55 g/10min ASTM D 1238
온도 190 °C -
하중 2.16 kg -
광학 특성값단위시험규격
ASTM 데이터
탁도 11 % ASTM D 1003
광선 투겠淅 83 % ASTM D 1003
기타 특성값단위시험규격
밀도 921 kg/m³ ASTM D 792
기계적 성질 (필름) 값단위시험규격
ASTM Data
파단시 강도, 평행 23 MPa ASTM D 882
파단시 강도, 수직 14 MPa ASTM D 882
파단시 신율 , 평행 175 % ASTM D 882
파단시 신율 , 수직 550 % ASTM D 882
시편두께 0.05 mm -
특징
생산 공정
Blown Film Extrusion
부가물
점착방지제
특별 특성
투명도
특성
Anti Slip
내화학성에
Oxidation Resistance
Certifications
Food contact, Food approval FDA 21 CFR
응용
범용, 포장
지역별 검색
쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.