Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAKEEP® i4 3DF-T - PEEK - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAKEEP® i4 3DF-T:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestakeep datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 12 / * cm³/10min ISO 1133
온도 380 / * °C -
하중 5 / * kg -
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 3500 / - MPa ISO 527
인장 강도 94 / - MPa ISO 527
항복강도 94 / - MPa ISO 527
항복변형률 5 / - % ISO 527
파단시 강도 76 / - MPa ISO 527
챠피 충격 강도, +23°C N / - kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C N / - kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 9.1 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
챠피 노치드 충격 강도, -30°C 6 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 338 / * °C ISO 11357-1/-3
유리 전이 온도, 10 °C/min 152 / * °C ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa 150 / * °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 205 / * °C ISO 75-1/-2
비카트 연화 온도, A 335 / * °C ISO 306
비카트 연화 온도, B 305 / * °C ISO 306
두께 H인 제품의 난연성 V-0 / * class IEC 60695-11-10
테스트 두께 3.2 / * mm -
ASTM 데이터
녹는점 338 °C ASTM D 3418
기타 특성건조/응축단위시험규격
밀도 1300 / - kg/m³ ISO 1183
밀도 1300 kg/m³ ASTM D 792
특징
생산 공정
Additive Manufacturing
인도 유형
Monofilament, 자연 색상
특별 특성
열안정성, Opaque
특성
Thermal Stability
내화학성에
Acid Resistance, Alkali Resistance, General Chemical Resistance, Solvent Resistance, Grease Resistance, Hydrolytically Stable, Oil Resistance, Oxidation Resistance
응용
의료
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.