Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® X7166 - PA12 FR(30) - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® X7166:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 도표
Any use of this information falls under the rules of our disclaimer.
제품 설명서

Low viscosity, self-extinguishing polyamide 12 compound, free of halogen and phosphorus

VESTAMID® X7166 NC is a heat stabilized PA 12 compound containing a non-migrating flame retardant, free of halogen and phosphorus. Tested according to UL94, VESTAMID® X7166 complies with the flammability class V-2.
 
Due to the halogen- and phosphorus-free flame retardants, VESTAMID® X7166 is especially suitable for the electronic and cable industry. It can be used for injection molding as well as for wire extrusion coating.
 
VESTAMID® X7166 is supplied as cylindrical granules, ready for processing, in moisture-proof bags.

Due to the flame retardants, the melt temperature should not exceed 260°C. We recommend melt temperatures within a range of 210°C to 230°C.

Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM

Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 108 / * cm³/10min ISO 1133
온도 250 / * °C -
하중 2.16 / * kg -
성형 수축률, 평행 0.7 / * % ISO 294-4, 2577
성형 수축률, 수직 0.8 / * % ISO 294-4, 2577
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 1890 / - MPa ISO 527
항복강도 47 / - MPa ISO 527
항복변형률 5.8 / - % ISO 527
파단시 평균신율 20 / - % ISO 527
챠피 충격 강도 , +23°C 57 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
챠피 충격 강도, -30°C 80 / - kJ/m² ISO 179/1eU
Type of failure C / - - -
챠피 노치드 충격 강도, +23°C 3 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
챠피 노치드 충격 강도, -30°C 5 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 178 / * °C ISO 11357-1/-3
유리 전이 온도, 10 °C/min 41 / * °C ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa 50 / * °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 140 / * °C ISO 75-1/-2
비카트 연화 온도, B 150 / * °C ISO 306
1.5mm 평균두께에서의 난연성 V-2 / * class IEC 60695-11-10
테스트 두께 1.6 / * mm -
두께 H인 제품의 난연성 V-2 / * class IEC 60695-11-10
테스트 두께 0.8 / * mm -
Yellow Card 유효한 예 / * - -
산소지수로서의 난연성 34 / * % ISO 4589-1/-2
전기적 특성건조/응축단위시험규격
ISO 데이터
상대 유전뮬, 1MHz 3.6 / - - IEC 62631-2-1
소산 인자, 1MHz 340 / - E-4 IEC 62631-2-1
부피 저항 1E12 / - Ohm*m IEC 62631-3-1
전기 압력 28 / - kV/mm IEC 60243-1
CTI 600 / - - IEC 60112
기타 특성건조/응축단위시험규격
물에서의 흡수성 1.3 / * % ISO 62와 유사
조건에서의 흡습성 0.6 / * % ISO 62와 유사
밀도 1070 / - kg/m³ ISO 1183
도표
비용적-온도(pvT) , VESTAMID® X7166, PA12 FR(30), Evonik
특징
생산 공정
사출 성형, 외형 압출, Wire/Cable Extrusion, 기타 압출, 코팅
인도 유형
펠렛 (입자,알갱이), 자연 색상
특별 특성
난연성, Halogen-free, Phosphorus-free, 열안정성
응용
전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
화학적 매체에 대한 저항력
산
에서의 아세트산 (질량 5%) (23°C)
23 °C에서의 시트르산 용액 (질량 10%) (23°C)
염기
에서의 수산화나트륨 용액 (질량 35%) (23°C)
에서의 수산화나트륨 용액 (질량 1%) (23°C)
에서의 수산화암모늄 용액 (질량 10%) (23°C)
알코올
23 °C에서의 이소프로필 알코올 (23°C)
23 °C에서의 메탄올 (23°C)
23 °C에서의 에탄올 (23°C)
탄화수소
에서의 n-헥산 (23°C)
에서의 톨루엔 (23°C)
에서의 이소옥탄 (23°C)
케톤
에서의 아세톤 (23°C)
에테르
에서의 디에틸 에테르 (23°C)
염액
에서의 염화나트륨 용액 (질량 10%) (23°C)
에서의 탄산나트륨 용액 (질량 20%) (23°C)
에서의 탄산나트륨 용액 (질량 2%) (23°C)
기타
에서의 초산 에틸 (23°C)
에서의 과산화수소 (23°C)
에서의 물 (23°C)
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.