Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Visico™ FR4451/LE4439 - PE - Borealis A/S

Material Data Center offers the following functions for Visico™ FR4451/LE4439:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Visico datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 0.5 g/10min ISO 1133
온도 190 °C -
负荷 2.16 kg -
기계적 특성값단위시험규격
ISO 데이터
굴곡 계수, 23°C 100 MPa ISO 178
쇼어 D 경도 40 - ISO 7619-1
Other Standards[S]
인장 강도 16 MPa IEC 60811-501
파단시 신율 400 % IEC 60811-501
S: These properties are reported by the producer according standards that are different to our defaults.
열적 특성값단위시험규격
ISO 데이터
산소지수로서의 난연성 32 % ISO 4589-1/-2
전기적 특성값단위시험규격
ISO 데이터
전기 압력 20 kV/mm IEC 60243-1
Processing Recommendation Extrusion값단위시험규격
Type of extrusion wire/cable - -
Pre-drying - Temperature 100 °C -
Zone 1 130 °C -
Zone 2 140 °C -
Zone 3 150 °C -
Zone 4 160 °C -
Zone 5 170 °C -
특징
생산 공정
Wire/Cable Extrusion
인도 유형
자연 색상
특별 특성
난연성, Halogen-free, U.V. 안정성 또는 기후 안정성
특성
Crosslinkable, Thermal Stability
응용
전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.