Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vitane R 9918 - TPU-GF20 - geba Kunststoffcompounds GmbH

Material Data Center offers the following functions for Vitane R 9918:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vitane datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성 - 테스트 견본 생산 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
기계적 특성값단위시험규격
ISO 데이터
파단시 신율 18 % ISO 527
굴곡 계수, 23°C 1500 MPa ISO 178
굴곡 계수 2800 MPa ISO 178
굴곡 계수-温度 -30 °C -
굴곡 강도 50 MPa ISO 178
챠피 충격 강도, +23°C N kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C N kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 45 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 22 kJ/m² ISO 179/1eA
내마모성 80 mm³ ISO 4649
쇼어 D 경도 65 - ISO 7619-1
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 130 °C ISO 75-1/-2
비카트 연화 온도, B 146 °C ISO 306
선형 열팽창 계수, 평행 10.3 E-6/K ISO 11359-1/-2
선형 열팽창 계수, 수직 114 E-6/K ISO 11359-1/-2
기타 특성값단위시험규격
밀도 1300 kg/m³ ISO 1183
테스트 견본 생산값단위시험규격
ISO 데이터
사출성형: 용융수지온도 220 °C ISO 294
사출성형: 금형온도 60 °C ISO 294
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 120 °C -
Pre-drying - Time 2 - 3 h -
Processing humidity ≤0.02 % -
용융수지온도 210 - 240 °C -
성형온도 40 - 80 °C -
Feed temperature 60 - 80 °C -
Zone 1 210 - 220 °C -
Zone 2 210 - 220 °C -
Zone 3 220 - 230 °C -
Nozzle temperature 230 - 240 °C -
특징
생산 공정
사출 성형
특성
Acoustical Barrier Properties, Good Adhesion, Thermal Stability
내화학성에
Oil Resistance
응용
자동차의, 스포츠 장비
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.