Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® ECO366H BK0734 - PA66 - Ascend

Material Data Center offers the following functions for Vydyne® ECO366H BK0734:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 전기적 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
기계적 특성건조/응축단위시험규격
ISO 데이터
항복강도 83 / - MPa ISO 527
파단시 신율 4 / - % ISO 527
굴곡 계수, 23°C 3900 / - MPa ISO 178
굴곡 강도 107 / - MPa ISO 178
챠피 충격 강도, +23°C 75 / - kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C 78 / - kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 3.4 / - kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 3.7 / - kJ/m² ISO 179/1eA
Izod충격강도, +23°C 6 / - kJ/m² ISO 180/1U
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 265 / * °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 75 / * °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 240 / * °C ISO 75-1/-2
1.5mm 평균두께에서의 난연성 V-0 / * class IEC 60695-11-10
테스트 두께 1.5 / * mm -
두께 H인 제품의 난연성 V-0 / * class IEC 60695-11-10
테스트 두께 0.4 / * mm -
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (1) 0.4 mm -
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (2) 0.75 mm -
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (3) 1.5 mm -
Glow Wire Ignition Temperature (GWIT) 960 °C IEC 60695-2-13
GWIT - thickness tested (1) 0.4 mm -
Glow Wire Ignition Temperature (GWIT) 960 °C IEC 60695-2-13
GWIT - thickness tested (2) 0.75 mm -
Glow Wire Ignition Temperature (GWIT) 800 °C IEC 60695-2-13
GWIT - thickness tested (3) 1.5 mm -
ASTM 데이터
UL94 난연성 V-0 - UL 94
테스트 두께 0.4 mm -
전기적 특성건조/응축단위시험규격
ISO 데이터
부피 저항 1E8 / - Ohm*m IEC 62631-3-1
전기 압력 17 / - kV/mm IEC 60243-1
CTI 600 / - - IEC 60112
ASTM 데이터
아크 저항 150 / - s ASTM D 495
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 80 °C -
Pre-drying - Time 4 h -
용융수지온도 270 - 285 °C -
성형온도 65 - 95 °C -
Zone 1 260 - 290 °C -
Zone 2 260 - 290 °C -
Zone 3 260 - 290 °C -
Nozzle temperature 260 - 290 °C -
특징
생산 공정
사출 성형
인도 유형
검정
부가물
윤활제, 이형제
특별 특성
난연성, Halogen-free, 열안정성
특성
Thermal Stability, Homopolymer
내화학성에
General Chemical Resistance
응용
자동차의, 전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.