Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BMC LP 250/22 RF - UP-(MD+GF)70 - Polynt S.p.A.

Material Data Center offers the following functions for BMC LP 250/22 RF:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other BMC datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Contração após a moldagem, paralelo 0.1 % ISO 294-4, 2577
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Resistência ao impacto Charpy, +23°C 30 kJ/m² ISO 179/1eU
Dureza Rockwell M 80 - ISO 2039-2
Other Standards[S]
Módulo de flexão, 23°C 10000 MPa ISO 14125A
Resistência à flexão 100 MPa ISO 14125A
S: These properties are reported by the producer according standards that are different to our defaults.
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
Propriedades elétricasValorUnidadeMétodo de ensaio
ISO Dados
Resistividade volumétrica específica 1E12 Ohm*m IEC 62631-3-1
Resistividade superficial específica 1E14 Ohm IEC 62631-3-2
Índice comparativo de linha de fuga 600 - IEC 60112
ASTM Dados
Resistência ao arco 180 s ASTM D 495
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água 0.2 % Sim. to ISO 62
Densidade 1800 kg/m³ ISO 1183
Características
Processamento
Moldagem por compressão
Forma de entrega
Composto de moldagem em massa
Características especiais
Retardante de chama, Sem halogéneo
Aplicaciones
Elétrica e Eletrônica
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.