View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Badalac® ASA/PC 130 FR HF UV - (ASA+PC) - Bada AG

Material Data Center offers the following functions for Badalac® ASA/PC 130 FR HF UV:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Badalac datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção

Any use of this information falls under the rules of our disclaimer.

Propriedades mecânicas

Valor

Unidade

Método de ensaio

ISO Dados

Módulo de tração

2600

MPa

ISO 527

Tensão na ruptura

MPa

ISO 527

Deformação na ruptura

ISO 527

Resistência ao impacto Charpy, +23°C

130

kJ/m²

ISO 179/1eU

Res. impacto Charpy c/entalhe, +23°C

kJ/m²

ISO 179/1eA

Propriedades térmicas

Valor

Unidade

Método de ensaio

ISO Dados

Temperatura de deflexão térmica, 1.80 MPa

°C

ISO 75-1/-2

Temperatura de deflexão térmica , 0.45 MPa

103

°C

ISO 75-1/-2

Temperatura de amolecimento Vicat , A

105

°C

ISO 306

Temperatura de amolecimento Vicat, B

°C

ISO 306

Coef. de expansão térmica linear, paralelo

E-6/K

ISO 11359-1/-2

Coef. de expansão térmica linear, perpend.

E-6/K

ISO 11359-1/-2

Flamabilidade a 1.5mm esp. nom.

V-0

class

IEC 60695-11-10

Espessuras do tubo de teste

1.5

Flamabilidade a espessura h

V-0

class

IEC 60695-11-10

Espessuras do tubo de teste

3.0

Glow Wire Flammability Index (GWFI)

850

°C

IEC 60695-2-12

GWFI - thickness tested (1)

Glow Wire Ignition Temperature (GWIT)

775

°C

IEC 60695-2-13

GWIT - thickness tested (1)

Outras propriedades	Valor	Unidade	Método de ensaio
Absorção de umidade	0.2	%	Sim. to ISO 62
Densidade	1260	kg/m³	ISO 1183

Recomendação de processamento Moldagem por injeção	Valor	Unidade	Método de ensaio
Pré-secagem - temperatura	80 - 100	°C	-
Pré-secagem - tempo	2 - 4	h	-
Umidade do processamento	≤0.05	%	-
Temperatura da massa	250 - 270	°C	-
Temperatura do molde	60 - 90	°C	-

Características

Processamento

Moldagem por injeção

Características especiais

Retardante de chama, Sem halogéneo, Estabilidade a raios U.V./Intempéries, Estável contra o calor

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.