Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BESTNYL SI00VI12BEWX - PA6 - Grupo Triesa

Material Data Center offers the following functions for BESTNYL SI00VI12BEWX:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Bestnyl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 3 g/10min ISO 1133
Propriedades mecânicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 2800 / 900 MPa ISO 527
Resistência à tração 80 / 40 MPa ISO 527
Deformação na ruptura 25 / >50 % ISO 527
Resistência ao impacto Charpy, +23°C N / N kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 5 / 12 kJ/m² ISO 179/1eA
Propriedades térmicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 70 / * °C ISO 75-1/-2
Temperatura de deflexão térmica , 0.45 MPa 185 / * °C ISO 75-1/-2
Flamabilidade a espessura h V-0 / * class IEC 60695-11-10
Propriedades elétricasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Resistividade superficial específica * / 1E11 Ohm IEC 62631-3-2
Outras propriedadesSeco / CondUnidadeMétodo de ensaio
Absorção de água 1.3 / * % Sim. to ISO 62
Densidade 1150 / - kg/m³ ISO 1183
Características
Processamento
Moldagem por injeção, Extrusão de tubos, Outros tipos de extrusão
Forma de entrega
Granulos
Aditivos
Lubrificantes, Desmoldante
Características especiais
Retardante de chama
Aplicaciones
Elétrica e Eletrônica
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.