Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Cadence™ GS2 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Cadence™ GS2:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Cadence datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades térmicas - Propriedades elétricas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto

Eastman Cadence™ GS2 is a high-clarity amorphous copolyester for film calendering. Calendered films made of

Eastman Cadence™ copolyesters are non-crystallizing, are halogen-free, offer wide calendering and

thermoforming windows and have good low-temperature toughness. They are cooperative in secondary operations

such as solvent-bonding, lamination, decoration, cold-forming, punching/cutting and embossment.

Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
Coeficiente de expansão térmica, long. 76.8 E-6/K ASTM D 696
DTUL @ 66 psi 71 °C ASTM D 648
DTUL @ 264 psi 64 °C ASTM D 648
Temp. de transição vítrea 82 °C ASTM E 1356
Temperatura de amolecimento Vicat 81 °C ASTM D 1525
Índice de oxigênio 24.1 % ASTM D 2863
Propriedades elétricasValorUnidadeMétodo de ensaio
ASTM Dados
Resistência elétrica, tempo curto 15.6 kV/mm ASTM D 149
Fator de dissipação dielétrica, 1 MHz 0.02 - ASTM D 150
Constante dielétrica, 1 MHz 2.62 - ASTM D 150
Resistividade superficial específica 1.65E16 Ohm ASTM D 257
Resistividade volumétrica específica 3.32E16 Ohm*cm ASTM D 257
Resistência ao arco 133 s ASTM D 495
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água, 24hr 0.15 % ASTM D 570
Densidade 1280 kg/m³ ASTM D 792
Características
Processamento
Calandragem, Termoformagem
Características especiais
Transparente
Características
Amorfo, Copolímero
Aplicaciones
Construção
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.