Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Cristal™ EV600 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Cristal™ EV600:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Cristal datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades ópticas - Outras propriedades - Recomendação de processamento Moldagem por injeção
Any use of this information falls under the rules of our disclaimer.
Informação do produto

Cristal™ EV600 copolyester is a high flow product designed and engineered specifically for cosmetics packaging

applications. With its unsurpassed color and clarity and an unmatched ability to mold thick parts with improved

gate aesthetics, Cristal™ is clearly a well-suited copolyester for premium cosmetics packaging. Other outstanding

features of Cristal™ are excellent chemical resistance, high gloss, and improvements in processing such as faster

cycle times, and lower scrap rates. Cristal™ is also ideally suited for two-shot molding techniques due to its lower

processing temperatures, very slow crystallization rate, and flow characteristics.


Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Contração após a moldagem, paralelo 0.0045 mm/mm ASTM D 955
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 1650 MPa ISO 527
Tensão no escoamento 47 MPa ISO 527
Deformação no escoamento 4.2 % ISO 527
Tensão na ruptura 28.9 MPa ISO 527
Deformação na ruptura 195 % ISO 527
ASTM Dados
Módulo de tração 1813 MPa ASTM D 638
Resistência à tração no escoamento 47.4 MPa ASTM D 638
Resistência à tração na ruptura 51.9 MPa ASTM D 638
Alongamento no escoamento 4 % ASTM D 638
Deformação na ruptura 322 % ASTM D 638
Módulo de flexão 1927 MPa ASTM D 790
Dureza Rockwell R 102 - ASTM D 785
Impacto Izod com entalhe, 1/8 in 934 J/m ASTM D 256
Impacto Izod com entalhe, baixa temperatura 65.7 J/m ASTM D 256
Temperatura -40 °C -
Resistência ao Impacto Izod, 1/8 in 2460 J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
DTUL @ 66 psi 71.5 °C ASTM D 648
DTUL @ 264 psi 63.5 °C ASTM D 648
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Haze 0.3 % ASTM D 1003
Transmitância luminosa 91.9 % ASTM D 1003
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1250 kg/m³ ASTM D 792
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Pré-secagem - temperatura 65 °C -
Pré-secagem - tempo 8 h -
Temperatura da massa 218 - 240 °C -
Temperatura do molde 16 - 38 °C -
Características
Processamento
Moldagem por injeção, Outros tipos de extrusão
Características especiais
Alto impacto., Transparente
Características
High Gloss, Copolímero
Resistência Química
Resistência química geral
Aplicaciones
Embalaje
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.