Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Fibrolon® 3D Wood - (PLA+Copolyester)-W... - FKuR Kunststoff GmbH

Material Data Center offers the following functions for Fibrolon® 3D Wood:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Fibrolon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Extrusão
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Biodegradable polymer compound suitable for the production of 3D printing filaments. The biobased carbon content is > 75 % (calculated). Contains wood fibers.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 3.1 cm³/10min ISO 1133
Temperatura 190 °C -
Carga 2.16 kg -
Índice de fluidez, MFI 3.5 g/10min ISO 1133
Temperatura 190 °C -
Carga 2.16 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 2900 MPa ISO 527
Resistência à tração 47 MPa ISO 527
Deformação no escoamento 5 % ISO 527
Tensão na ruptura 38 MPa ISO 527
Deformação na ruptura 6.5 % ISO 527
Módulo de flexão, 23°C 2950 MPa ISO 178
Resistência ao impacto Charpy, +23°C 21 kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 4.4 kJ/m² ISO 179/1eA
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 155 °C ISO 11357-1/-3
Outras propriedadesValorUnidadeMétodo de ensaio
Biobased content 75 % -
Recomendação de processamento ExtrusãoValorUnidadeMétodo de ensaio
Type of extrusion profile - -
Pré-secagem - temperatura 60 °C -
Pré-secagem - tempo 2 - 4 h -
Umidade do processamento ≤0.2 % -
Temperatura - zona de alimentação 60 °C -
Zona 1 160 °C -
Zona 2 170 °C -
Zona 3 180 °C -
Zona 4 180 °C -
Temperatura do bico 185 °C -
Características
Processamento
Extrusão de perfis, Additive Manufacturing
Forma de entrega
Granulos, Marrom
Certifications
Contém recursos renováveis, Biodegradável
Aplicaciones
Filament for 3D Printing, Brinquedos
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.