Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HOPELEN SFI-151 - PP - Lotte Chemical Corporation

Material Data Center offers the following functions for HOPELEN SFI-151:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hopelen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades ópticas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 8 g/10min ISO 1133
ASTM Dados
Índice de fluidez, MFI 8 g/10min ASTM D 1238
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Tensão no escoamento 32 MPa ISO 527
Deformação na ruptura 500 % ISO 527
Módulo de flexão, 23°C 1520 MPa ISO 178
Dureza Rockwell R 100 - ISO 2039-2
ASTM Dados
Resistência à tração no escoamento 35 MPa ASTM D 638
Deformação na ruptura 500 % ASTM D 638
Módulo de flexão 1472 MPa ASTM D 790
Dureza Rockwell R 102 - ASTM D 785
Impacto Izod com entalhe, 1/8 in 39.2 J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 162 °C ISO 11357-1/-3
ASTM Dados
DTUL @ 66 psi 113 °C ASTM D 648
Temperatura de fusão 162 °C ASTM D 3418
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Haze 2 % ASTM D 1003
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 900 kg/m³ ISO 1183
Densidade 900 kg/m³ ASTM D 792
Características
Características especiais
Transparente
Características
Homopolímero
Certifications
Contacto com alimentos
Aplicaciones
Embalaje
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.