Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hostalen PP H4122 103220 - PP - LyondellBasell Industries

Material Data Center offers the following functions for Hostalen PP H4122 103220:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hostalen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 0.3 g/10min ISO 1133
Temperatura 230 °C -
Carga 2.16 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Tensão no escoamento 30 MPa ISO 527
Deformação no escoamento 13 % ISO 527
Módulo de tensão de fluência, 1h 1060 MPa ISO 899-1
Módulo de tensão de fluência, 1000h 500 MPa ISO 899-1
Res. impacto Charpy c/entalhe, +23°C 110 kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C 5.8 kJ/m² ISO 179/1eA
Ball indentation hardness 50 MPa ISO 2039-1
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica , 0.45 MPa 89 °C ISO 75-1/-2
Temperatura de amolecimento Vicat , A 159 °C ISO 306
Temperatura de amolecimento Vicat, B 83 °C ISO 306
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 908 kg/m³ ISO 1183
Características
Processamento
Extrusão de tubos, Extrusão de chapas, Outros tipos de extrusão
Forma de entrega
Negro
Características especiais
Estável contra o calor
Características
Copolímero
Resistência Química
Resistência à oxidação
Certifications
Contacto com alimentos, Aprobación del 1935/2004/EG, Aprovação para contacto com alimentos10/2011
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.