Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Inzea® F19 HT - (PLA+PSAC) - Nurel S.A.

Material Data Center offers the following functions for Inzea® F19 HT:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Inzea datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades ópticas - Outras propriedades - Propriedades do filme
Any use of this information falls under the rules of our disclaimer.
Informação do produto
more information can be found in the following table
Rilsamid® Chemical Resistance
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 5 cm³/10min ISO 1133
Temperatura 190 °C -
Carga 2.16 kg -
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Haze 70 % ASTM D 1003
Outras propriedadesValorUnidadeMétodo de ensaio
Moisture Content 0.3 % -
Propriedades do filmeValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração, paralelo 2700 MPa ISO 527-3
Tensão na ruptura, paralelo 40 MPa ISO 527-3
Deformação Máxima, paralelo 100 % ISO 527-3
Resistência ao rasgamento Trouser, perpend. 9 N/mm ISO 6383-1
Tipo de extrusão blown - -
Espessura de corpo de prova 0.05 mm -
Características
Processamento
Outros tipos de extrusão, Termoformagem
Características especiais
Transparente
Certifications
Contém recursos renováveis, Biodegradável, Contacto com alimentos, Compostable ISO 13432 (Produtor), Compostable ISO 13432 (Certificado)
Disponibilidade regional
Europa, America Centra e do Sul
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.