View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ISONYL® A66 GF30 - PA66-GF30 - Sirmax S.p.A.

Material Data Center offers the following functions for ISONYL® A66 GF30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Isonyl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção

Any use of this information falls under the rules of our disclaimer.

Características de processamento/físicas

Valor

Unidade

Método de ensaio

ISO Dados

Contração após a moldagem, paralelo

0.2

ISO 294-4, 2577

Propriedades mecânicas

Valor

Unidade

Método de ensaio

ISO Dados

Módulo de tração

9500

MPa

ISO 527

Tensão na ruptura

190

MPa

ISO 527

Deformação na ruptura

ISO 527

Módulo de flexão, 23°C

8500

MPa

ISO 178

Resistência à flexão

260

MPa

ISO 178

Resistência ao impacto Charpy, +23°C

kJ/m²

ISO 179/1eU

Res. impacto Charpy c/entalhe, +23°C

kJ/m²

ISO 179/1eA

Impacto Izod com entalhe, +23°C

kJ/m²

ISO 180/1A

Propriedades térmicas

Valor

Unidade

Método de ensaio

ISO Dados

Temperatura de deflexão térmica, 1.80 MPa

250

°C

ISO 75-1/-2

Temperatura de amolecimento Vicat, B

250

°C

ISO 306

Flamabilidade a 1.5mm esp. nom.

class

IEC 60695-11-10

Espessuras do tubo de teste

1.6

Outras propriedades	Valor	Unidade	Método de ensaio
Densidade	1360	kg/m³	ISO 1183

Recomendação de processamento Moldagem por injeção	Valor	Unidade	Método de ensaio
Pré-secagem - temperatura	80 - 100	°C	-
Pré-secagem - tempo	3	h	-
Temperatura da massa	270 - 290	°C	-
Temperatura do molde	90	°C	-

Características

Processamento

Moldagem por injeção

Certifications

RoHS

Aplicaciones

Elétrica e Eletrônica

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico, America Centra e do Sul

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.