Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of K-Resin® ECO KR03 - SB - INEOS Styrolution

Material Data Center offers the following functions for K-Resin® ECO KR03:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other K-Resin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades ópticas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Attributed Content of ISCC-certified Bio-Circular Sources (min.): 60 %
Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Índice de fluidez, MFI 7.5 g/10min ASTM D 1238
Temperatura 200 °C -
Carga 5 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Módulo de tração 1517 MPa ASTM D 638
Resistência à tração no escoamento 26.2 MPa ASTM D 638
Deformação na ruptura 230 % ASTM D 638
Módulo de flexão 1793 MPa ASTM D 790
Resistência à flexão 37.2 MPa ASTM D 790
Dureza Shore D 63 - ASTM D 2240
Other Standards[S]
Deformação nominal na ruptura 170 %
S: These properties are reported by the producer according standards that are different to our defaults.
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
DTUL @ 264 psi 62.2[ann.] °C ASTM D 648
Temperatura de amolecimento Vicat 85 °C ASTM D 1525
ann.: annealed
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Brilho 162 - ASTM D 2457
Haze 1 % ASTM D 1003
Transmitância luminosa 92 % ASTM D 1003
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1010 kg/m³ ASTM D 792
Características
Processamento
Moldagem por injeção, Extrusão de chapas, Moldagem por sopro, Termoformagem
Forma de entrega
Granulos
Características especiais
Alto impacto., Transparente
Características
Mistura de resina, High Gloss
Certifications
Contém recursos renováveis, Contacto com alimentos, ISCC Plus
Aplicaciones
Médico, Embalaje, Brinquedos
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.