View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of KOPET® KP132FR - PET - Kolon Industries

Material Data Center offers the following functions for KOPET® KP132FR:
unit conversion, PDF datasheet print

Check here, which other Kopet datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção

Any use of this information falls under the rules of our disclaimer.

Propriedades mecânicas

Valor

Unidade

Método de ensaio

ISO Dados

Resistência à tração

MPa

ISO 527

Módulo de flexão, 23°C

2520

MPa

ISO 178

Res. impacto Charpy c/entalhe, +23°C

kJ/m²

ISO 179/1eA

ASTM Dados

Resistência à tração

MPa

ASTM D 638

Módulo de flexão

2649

MPa

ASTM D 790

Resistência à flexão

103

MPa

ASTM D 790

Impacto Izod com entalhe, 1/8 in

J/m

ASTM D 256

Propriedades térmicas

Valor

Unidade

Método de ensaio

ISO Dados

Temperatura de fusão, 10°C/min

250

°C

ISO 11357-1/-3

Flamabilidade a espessura h

V-2

class

IEC 60695-11-10

Espessuras do tubo de teste

0.8

ASTM Dados

UL94 flamabilidade

V-2

UL 94

Espessuras do tubo de teste

0.8

DTUL @ 66 psi

103

°C

ASTM D 648

Temperatura de fusão

254

°C

ASTM D 3418

Outras propriedades	Valor	Unidade	Método de ensaio
Densidade	1700	kg/m³	ISO 1183
Densidade	1700	kg/m³	ASTM D 792

Recomendação de processamento Moldagem por injeção	Valor	Unidade	Método de ensaio
Pré-secagem - temperatura	110 - 140	°C	-
Pré-secagem - tempo	3 - 5	h	-
Umidade do processamento	≤0.05	%	-
Temperatura do molde	60 - 80	°C	-
Zona 1	255	°C	-
Zona 2	260	°C	-
Zona 3	265	°C	-
Temperatura do bico	270	°C	-

Características

Processamento

Moldagem por injeção, Outros tipos de extrusão

Características especiais

Retardante de chama

Disponibilidade regional

América do Norte, Ásia Pacífico

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.