Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LAPEROS™ E525T - LCP-MD25 - Polyplastics

Material Data Center offers the following functions for LAPEROS™ E525T:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Laperos datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de flexão, 23°C 12000 MPa ISO 178
Resistência à flexão 155 MPa ISO 178
Res. impacto Charpy c/entalhe, +23°C 7 kJ/m² ISO 179/1eA
ASTM Dados
Resistência à tração 145 MPa ASTM D 638
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 235 °C ISO 75-1/-2
Temperatura de deflexão térmica , 0.45 MPa 270 °C ISO 75-1/-2
Flamabilidade a espessura h V-0 class IEC 60695-11-10
Cartão Amarelo (yellow card) disponível sim - -
Propriedades elétricasValorUnidadeMétodo de ensaio
ISO Dados
Constante dielétrica, 1MHz 4 - IEC 62631-2-1
Fator de dissipação dielétrica, 1MHz 300 E-4 IEC 62631-2-1
Resistividade volumétrica específica 3E14 Ohm*m IEC 62631-3-1
Índice comparativo de linha de fuga 150 - IEC 60112
ASTM Dados
Resistência ao arco 49 s ASTM D 495
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1550 kg/m³ ISO 1183
Características
Características especiais
Retardante de chama
Disponibilidade regional
Ásia Pacífico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.