Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LIGHTER™ S93 - PET - Equipolymers Global

Material Data Center offers the following functions for LIGHTER™ S93:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lighter datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção
Any use of this information falls under the rules of our disclaimer.
Informação do produto
For more detailed information, please read our brochure p. 46 to 54
or contact our representatives in your region.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 2300 MPa ISO 527
Tensão no escoamento 55 MPa ISO 527
Deformação no escoamento 4 % ISO 527
Tensão na ruptura 24 MPa ISO 527
Deformação na ruptura 250 % ISO 527
Módulo de flexão, 23°C 2100 MPa ISO 178
Impacto Izod com entalhe, +23°C 4.5 kJ/m² ISO 180/1A
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 247 °C ISO 11357-1/-3
Temp. de transição vítrea, 10 °C/min 78 °C ISO 11357-1/-2
Temperatura de amolecimento Vicat, B 77 °C ISO 306
Coef. de expansão térmica linear, paralelo 83 E-6/K ISO 11359-1/-2
Outras propriedadesValorUnidadeMétodo de ensaio
Intrinsic Viscosity 0.8 dl/g -
Acetaldeído 1 ppm -
Color b 1.5 - CIE
Crystallinity 50 % -
Moisture Content 0.4 % -
Bulk density 880 kg/m³ -
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Temperatura da massa 277 °C -
Temperatura do molde 20 °C -
Características
Processamento
Moldagem por injeção, Moldagem por sopro
Características
Copolímero
Certifications
Contacto com alimentos
Aplicaciones
Embalaje
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.